Jb-lighting A12 Manual do Utilizador descarregar pdf (Página 54)

29 37 Red (8 Bit) 0-100% 000-255

38 Red ne (16 Bit) 0-100% 000-255

30 39 Green (8 Bit) 0-100% 000-255

40 Green ne (16 Bit) 0-100% 000-255

31 41 Blue (8 Bit) 0-100% 000-255

42 Blue ne (16 Bit) 0-100% 000-255

32 43 White (8 Bit) 0-100% 000-255

44 White ne (16 Bit) 0-100% 000-255

}

Pattern RGBW

FIXTURE MODE "Standard"

Color mixing

The

A12

features

a colour wheel channel, RGBW colour mixing channels and a CTC

channel. The colour wheel channel has priority. Only if the colour wheel channel is set to

DMX value 000-001 it is possible to operate the RGB channels. (In Extended mode E8

at DMX value 001 all LED rings are adapted to the color of the inner ring (A)).

The CTC channel can be combined with both the RGBW channels and the colour wheel

channel.

The pattern channel

of the colour wheel channel

and one colour with

RGBW colour mixing. The patterns will

work between this two colours.

Control channel 5

The control channel (channel 5) offers additional control over the RGBW-channels. It is

useful to adjust the white balance when units are being used in rental business and a

variety of fixtures are supposed to offer a even colour mixing.

DMX 000-007: No white balance active.

DMX 008-015: Basic adjustment on the RGBW channels. So it‘s possible to have

always the same white from different production series (factory adjustment). Marginal

reduced intensity of the RGBW strings.

DMX 016-023: White balance to 5600K. Reduced intensity in blue. Possible reduction in

intensity of green and red. If fixtures are set to this DMX value the white of fixed colors

and RGBW color mixing is the same, it‘s a white similar to HMI white.

DMX 024-031: White balance same to DMX 016-023. Plus the RGBW curves are

working in linear mode so it is possible to use the color picker function of various

lighting control desks.

Some lighting desks have a delay during DMX refreshing and DMX values get missed

during a fade out or using the fader. That means the A12 with his fast reaction time rate

this happen as a shutter and shows flickering in the beam. To avoid this you can select

5 different modes. Depending on the modus, the reaction time of the A12 gets lower.

(channel 9) provides patterns with the LED rings. Choose one colour

5.3 Important information

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Comentários a estes Manuais

Sem comentários

Jb-lighting A12 Manual do Utilizador Página 54

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Jb-lighting A12